Technical Specifications of the APC Smart-UPS 2200

The APC Smart-UPS 2200VA offers a nominal output of 2200 VA, 1980 W, with an input voltage range of 100-240 VAC. It features a compact design and includes essential protections against power anomalies, ensuring reliable performance for critical applications.

Power Capacity and Output

The APC Smart-UPS 2200VA delivers a nominal output of 2200 VA and 1980 W, ensuring reliable power delivery for connected devices. It operates efficiently, with an input voltage range of 100-240 VAC and an output voltage of 120/230 VAC. The UPS supports both 120V and 230V output configurations, making it versatile for various applications. Its high operating efficiency, up to 97%, minimizes energy losses, while the battery provides a runtime of approximately 30 minutes for a typical load, ensuring uninterrupted operation during power outages.

Input and Output Requirements

The APC Smart-UPS 2200VA requires an input voltage range of 100-240 VAC, with a 50/60 Hz frequency. It provides an output voltage of 120/230 VAC, supporting both 120V and 230V configurations. The unit includes multiple IEC outlets for flexible connectivity. It is designed to handle a wide range of applications, from servers to networking equipment, ensuring compatibility and reliable power distribution. The UPS operates efficiently, with a high power factor, making it suitable for both standard and high-performance environments.

Operational Features and Modes

The APC Smart-UPS 2200VA operates in both standard and high-efficiency modes, ensuring reliable power delivery. It features automatic voltage regulation, minimizing fluctuations and protecting connected devices.

Automatic Voltage Regulation (AVR)

The APC Smart-UPS 2200VA features Automatic Voltage Regulation (AVR), which safeguards connected devices from voltage fluctuations. This technology adjusts incoming utility power to maintain stable output voltage, protecting equipment from brownouts, surges, and overvoltages. The AVR ensures continuous operation without resorting to battery power, preserving battery life for critical outages. By stabilizing voltage levels, it prevents data loss and hardware damage, making it essential for sensitive electronic systems. The Smart-UPS 2200VA operates in both standard and high-efficiency modes, providing reliable power conditioning and optimal performance.

Backup and Battery Modes

The APC Smart-UPS 2200VA operates in backup and battery modes to ensure uninterrupted power delivery. In backup mode, it switches to battery power during utility failures, providing a seamless transition. Battery mode activates when the UPS is running solely on battery power, often indicating low battery levels or when the device is used as a backup source. These modes ensure data integrity and system availability, protecting against power failures and ensuring continuous operation of connected equipment.

Maintenance and Troubleshooting

Regular maintenance ensures optimal performance. Check battery health, replace worn-out batteries, and verify connections. Use diagnostic tools for fault detection and refer to the manual for solutions.

Battery Replacement and Care

Proper battery care ensures long-lasting performance. Replace batteries every 3-5 years or when capacity drops below 50%. Turn off the UPS, disconnect the power cord, and remove the battery. Install a new genuine APC battery to maintain reliability. Avoid mixing old and new batteries. After replacement, charge the battery for at least 24 hours. Store unused batteries in a cool, dry place. Dispose of old batteries according to local regulations. Regular checks and timely replacements prevent unexpected power failures, ensuring continuous protection for connected devices.

Common Issues and Solutions

Common issues with the APC Smart-UPS 2200 include battery alarms, unexpected shutdowns, and connectivity problems. For battery alarms, check connections, ensure the battery is charged, and replace it if necessary. If the UPS shuts down frequently, verify input voltage levels and ensure the circuit can handle the load. Connectivity issues can often be resolved by restarting the UPS or reinstalling PowerChute software. Regular firmware updates and battery tests help prevent these issues. Always refer to the user manual for detailed troubleshooting steps to maintain optimal performance and reliability.

Software and Firmware

The APC Smart-UPS 2200 utilizes PowerChute software for monitoring and controlling power conditions. Firmware updates are essential for optimal performance and security. The UPS includes CDs with software and documentation for easy setup and management.

PowerChute Software Overview

The PowerChute software is designed to monitor and manage the APC Smart-UPS 2200, providing real-time power status updates and enabling remote shutdown. It supports multiple operating systems, ensuring compatibility with various devices. The software allows users to monitor multiple UPS units, set preferences for shutdowns, and receive alerts for critical events. PowerChute also includes features for scheduling backups and logging power events. Available for download or included on the provided CD, it simplifies UPS management and enhances system reliability. This tool is essential for optimizing power protection and ensuring seamless operations during outages.

Firmware Updates and Management

Firmware updates for the APC Smart-UPS 2200 are essential for maintaining optimal performance and security. Updates can be installed via USB or network using PowerChute software. Regularly checking for updates ensures the UPS operates with the latest features and bug fixes. The process involves downloading updates from APC’s official website or through the PowerChute interface. Proper installation requires following the provided instructions to avoid disruptions. Keeping the firmware up-to-date guarantees enhanced functionality, reliability, and compatibility with connected devices, ensuring your power protection system remains robust and efficient. Always verify the source of updates to prevent unauthorized modifications.

Warranty and Support

The APC Smart-UPS 2200 is backed by a standard warranty covering parts and labor for a specified period. Dedicated customer support is available for assistance.

Standard Warranty Coverage

The APC Smart-UPS 2200 is covered by a standard warranty that includes parts and labor for a specified period, typically two years. This ensures protection for the UPS system and batteries, providing customers with peace of mind. The warranty period may vary depending on the region and registration, with some options offering an extended warranty up to three years. Terms and conditions apply, and full details can be found in the official APC documentation or user manual.